Bathrooms and RestroomsResidential Bathrooms
A universal design for your bathroom can accommodate not only the disabled but also people of varying sizes, shapes, abilities, and ages (traditional designs are based on able-bodied, non-elderly adults.
Bathrooms are usually small and efficient spaces. Wheelchair users need larger bathrooms to allow for maneuvering.
Bathroom doors should be wide enough to allow easy access. A standard wheelchair is 24-27" wide. Doorways should be a minimum of 32" wide. If the doorway is located in the hallway and requires turning of the wheelchair, you'll need a 36" door, or a wider hallway.
The wheelchair also needs adequate room inside the bathroom for turning and also room to open the door when it's time to leave.
A roll-under wall mounted sink or a sink set into a vanity top will allow wheelchair access. We will need clear area under the sink for the required knee and toe clearance, so that the wheelchair can be rolled up to the bathroom sink.
The recommended maximum height from top of counter to the floor is 34" and the recommended minimum distance from underside of the sink to floor is 29". The water and drain lines need to be covered with insulated wrappings to prevent burns and bruises.
Barrier-free bathrooms offer a safe solution for people who have reduced mobility and balance. Most bath and toilet rooms are shared between several family member, an accessible designs should address multiple requirements.
At Handicapped Solutions we understand that identifying these factors is essential in designing the right bathroom . A wheelchair accessible bathroom can accommodate handicapped individuals and is much safer for the entire family.
Commercial Restrooms
If you have a commercial location we can help by bringing your facilities up to current ADA standards. If your restroom needs a turn radius or the doors in your lobby are too small give us a call.
